Mixers for elevated tanks Type HEM 1

Please see the installation instructions for technical specifications.

Advantages
Additional advantages

Quiet operation Ball bearing in oil bath Ideal in steel tanks

Quick installation Reinforced outer tube Made in Germany

Business areas

Agricultural sector
Biogas sector
Industrial use

Suitable for

Gravity tank

In the case of the stainless steel version, only those components that come into direct contact with the slurry are manufactured of stainless steel. For mixers that are installed on the floor angle plane we recommend the fitting of an oil expansion tank for optimum lubrication of the upper seal.

When only used occasionally, the standard model with shaft seal rings will be adequate. For prolonged operational periods we recommend using a mechanical seal.

Technical specifications:

Pusher propeller: Ø 600 mm
overall length: 3200 mm
PTO connection: 1 3/8” Z6 DIN 9611
propeller speed: max. 1000 rpm
power requirement: 44-118 KW (60–160 hp)
bearings: roller bearings in oil bath

Connector for installed mixer to be selected according to the silo type without price supplement.

Technical data - Type HEM 1 installed mixer

Installed mixer directly flanged to the silo wall, with two external supports and seal. It is recommended that they are installed in steel containers. Internal supports supplied separately, required for propeller diameters over 600 mm.