Mixer tower fixed

With the mixer tower fitted with the Type E2-102 slurry mixer, BUSCHMANN offers a mobile slurry mixer for elevated slurry tanks.

Advantages

Versatile in use Tried-and-tested technology Easy to use

additional advantages

For the prevention of floating and sinking layers Made in Germany

Business areas

  • Agricultural sector
  • Biogas sector

Suitable for

  • Gravity tank
It is ideal for homogenising and mixing slurry in particularly large tanks. The machine is attached to the tractor’s rear hydraulic system, the mixer arm hydraulically lowered into the desired working position, and the mixing operation can commence. The front-mounted three point attachment requires the drive shaft to be a minimum of 1200 mm long. Front mounting is necessary in order to achieve a height adjustment range of 600 mm. This expands the potential range of applications because it can be used to easily mix slurry tanks of different heights. The load is taken off the universal joints on the drive shaft. Drive is achieved via 2 angled drives. Using this system, mixer towers of up to 6000 m in height can be constructed. This design is suitable for applications that require a tilt angle of up to 60°. Very important: When using a slurry mixer tower only mixers with pusher propellers may be used! Standard equipment: Mixer tower constructed to the required height, front-mounted three point attachment. Mixer tower constructed to the required height, front-mounted three point attachment. Hydraulic tilt angle adjustment of the outrigger arm with double-acting hydraulic cylinder, stroke length 600 mm. Cylinder size Ø 80 x Ø 35 x 600 Two hydraulic hoses with quick connectors. Length corresponds with the installation height Outrigger arm for mixer lengths of up to 6000 mm. Maximum working angle 60°. Adjustment range 0° to 60° (90°–30°). The maximum angular load on the universal joints = 32° at the maximum tilt angle of 60°. Galvanised construction The basic construction is designed to accept slurry mixers of the E2–102–6000 range. Power transmission 77 kW (105 hp) at 540 rpm, 114 kW (155 hp) at 1000 rpm. For this design it is imperative that a double-sided wide-angle drive shaft is used. This can be supplied as an accessory item. Technical data - Slurry mixer tower – fixed Galvanised, includes hydraulic tilt angle adjustment and 2 support legs, adjustable. For operation, a double-sided wide-angle drive shaft must be fitted between the tower and the mixer. The listed item numbers do not include the associated slurry mixer. Available on request: Work platform with access ladder

Flexible and customised.

Various equipment variants, attachments and accessories are available for our agitators and systems.

Constant velocity drive shaft

Constant velocity
drive shaft

Details: Mixer tower fixed

Specifications are subject to change without notice.