Mixers for elevated tanks HEM-3


  • Bundled agitation jet
  • Ball bearing in oil bath
  • Quiet operation

Additional advantages

  • Available with mechanical seal
  • Made in Germany

Business areas

  • Agricultural sector
  • Biogas sector
  • Industrial use

Suitable for

  • Gravity tank

Required aperture in the silo wall is 210 x 210 mm. In the case of the stainless steel version, only those components that come into direct contact with the slurry are manufactured of stainless steel. For mixers that are installed on the floor angle plane we recommend the fitting of an oil expansion tank for optimum lubrication of the upper seal.

When only used occasionally, the standard model with shaft seal rings will be adequate. For prolonged operational periods we recommend using a mechanical seal.

Technical specifications:

Technical specifications: Pusher propeller: Ø 600 mm, options up to Ø 700 mm; overall length: 3200 mm; PTO connection: 1 3/8” Z6 DIN 9611; propeller speed: max. 1000 rpm; power requirement: 44-118 KW (60–160 hp); bearings: roller bearings in oil bath; connector for installed mixer to be selected according to the silo type without price supplement.

Technical data - Type HEM 3 installed mixer

Installed mixer in accordance with type HEM 2, but with one mixing nozzle and one external support.

Accessories - Type HEM 3 installed mixer

Flexible and customised.

Various equipment variants, attachments and accessories are available for our agitators and systems.

Specifications are subject to change without notice.