Slatted-floor agigators mixer Type „SP 1“ and „SP 3“

This range of slow-running mixers operates at a speed of 80 rpm.

Advantages

  • Very rugged
  • No wear parts in the slurry
  • Stirring paddle height-adjustable

additional advantages

  • Versatile in use
  • Made in Germany

Business areas

  • Agricultural sector
  • Industrial use

Suitable for

  • Slatted floor

A minimum slat gap of 35 mm is required because of the size of the mixing paddle. The motor coupling with the DIN profile of the power take-off shaft allows the mixing paddle to be changed quickly. The Z-shaped mixing paddle makes either a suction or pushing flow direction possible. The advantage of this range of mixers is that no bearings, rotating or wearing parts come into contact with the slurry which ensures low maintenance requirements. The compact design with pull-out grips guarantees easy transport.

Technical data - Slatted-floor slurry agtitators SP 1 – 3/80
Slatted-floor agigators mixer Type „SP 1“
Slatted-floor agigators mixer Type „SP 1“

Slatted-floor slurry agtitators SP 1 – 3/80

Hot-dip galvanised tubular frame, 2 wheels on roller bearings (400 x 100, pneumatic tyres) for transportation. Ø 35 mm drive shaft with 1 3/8” slot-in PTO shaft coupler in accordance with DIN 9611.

Height adjustment by safety cable winch. Drive via 3 kW/80 rpm geared motor. Attached motor protection switch with undervoltage release. Bracket for fixing to the slatted floor. Connector cable with Euro plug.

Dimensions:

  • Overall width 600 mm
  • Overall height 1900 mm
  • Overall length 1100 mm
  • Immersion depth 1150 mm
  • Paddle wide 775 mm
  • Paddle height 150 mm
Technical data - Slatted-floor slurry agtitators SP 3–3/80
Slatted-floor agigators mixer „SP 3“
Slatted-floor agigators mixer „SP 3“

Slatted-floor slurry agitators SP 3 – 3/80

Hot-dip galvanised tubular frame, 2 wheels on roller bearings (400 x 100, pneumatic tyres) for transportation. Ø 35 mm drive shaft with 1 3/8” slot-in PTO shaft coupler in accordance with DIN 9611. Lower intermediate mounting. This is required because of the immersion depth. Height adjustment by safety cable winch. Drive via 3 kW/80 rpm geared motor. Attached motor protection switch with undervoltage release. Bracket for fixing to the slatted floor. Connector cable with Euro plug.

Dimensions:

  • Overall width 1200 mm

  • Overall height 2420 mm

  • Overall length 1060 mm

  • Immersion depth 1500 mm

  • Paddle wide 775 mm

  • Paddle height 150 mm

Specifications are subject to change without notice.