Gearbox
Reversing gearbox Standard
Scope of delivery:
This retrofit kit includes a gearbox flange, the reversing gearbox, a protective cone and the required bolts.
The use of a reversing gearbox is limited to the mixer types C/E-76, C/E-102 and E-102.
We recommend that this is only fitted where type E-102 bearing technology is employed.
2 x PTO connection 1 3/8” Z6 DIN 9611, ratio 1:1, only to change the direction of rotation
Heavy duty reversing gearbox
The heavy duty reversing gearbox is designed for up to 40% higher power transmission. The scope of supply and the recommendations for use correspond to the standard version.
2 x PTO connection 1 3/8” Z6 DIN 9611, ratio 1:1, only to change the direction of rotation
Angular gear
It can be mounted to agitator types C-102, C/E-76, C/E-102 and E-102. The angled drive is available in a standard and a heavy duty version for up to 66% higher power transmission compared with the standard version. There is no change in the direction of rotation of the agitator blades or the speed.
Mobile reversing gearbox with three-point hitch
- Versatile application
- Choice of 2 gearboxes
- 4 height-adjustable feet
- PTO connection on both sides: 1 3/8” Z6
- Adjustment spindle for optimum adjustment of the universal joints
- Reduction of the angle at the drive shafts
Please note:
Not every agitator is designed for two directions of rotation.
The driven agitator must be secured to prevent it from shifting or tipping over.
The required drive shafts can be ordered as optional extras along with the main unit.
Specifications are subject to change without notice.