Mixers for elevated tanks HEM-2
Advantages
- Flexible installation
- Ball bearing in oil bath
- Quiet operation
Additional advantages
- Available with mechanical seal
- Made in Germany
Business areas
- Agricultural sector
- Biogas sector
- Industrial use
Suitable for
- Gravity tank
Required aperture in the silo wall is 210 x 210 mm. In the case of the stainless steel version, only those components that come into direct contact with the slurry are manufactured of stainless steel. For mixers that are installed on the floor angle plane we recommend the fitting of an oil expansion tank for optimum lubrication of the upper seal.
When only used occasionally, the standard model with shaft seal rings will be adequate. For prolonged operational periods we recommend using a mechanical seal.
Technical specifications:
Hélices pression: Ø 600 mm, au choix jusqu'à Ø 700 mm; longueur totale: 3.200 mm; vitesse hélice: max. 1.000 1/min; besoin de puissance: 44-118 KW (60-160 CV); paliers: Paliers à roulement en bain d'huile; plaques de raccordement pour mixeur à monter au choix selon type de récipient sans supplément.
Technical data - Type HEM 2 installed mixer
Installed mixer with vibration-damped seal in the wall area, complete with 2 external supports, one internal support and the seal carrier assembly with the required seals.
Accessories - Type HEM 2 installed mixer
Flexible and customised.
Various equipment variants, attachments and accessories are available for our agitators and systems.
Specifications are subject to change without notice.